IGreenLover Paint protection – What is it? Any good?

GreenLover Paint protection – What is it? Any good?

Well here’s all the facts – The proof is in the pudding

 

 

IGreenLover

 

Further information
Changes since the last version are highlighted in the margin. This version replaces all previous versions.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at
the date of its publication. The information given is designed only as guidance for safe handling, use, processing,
storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The
information relates only to the specific material designated and may not be valid for such material use in combination
with any other materials or any process, unless specified in the test.

SAFETY DATA SHEET
iGreenLover™ Ecocoat Quartz
Material no.
Specification 154283 Revision date 22.04.2014
Version 1.12 Print date 23.04.2014
Page Page 1 of 4
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
PRODUCT NAME : iGreenLover™ ecocoat quartz
FUNCTION : Hydro- & oleophobizing and easy clean agent surface modifier and gloss
enchancer
COMPANY
:
iGreenLover
Sdn
Bhd
ADDRESS
:
12A,
Jalan
Palam
34/18A,
Taman
Perindustrian
Pak
Chun
Section
34,
6TH
Mile,
Jalan
Bukit
Kemuning,
40470
Shah
Alam,
Selangor
Darul
Ehsan,
Malaysia
PHONE : +60178888289
FAX : +603 5166 7111
EMAIL ADDRESS : [email protected]
2. HAZARDS IDENTIFICATION
NON HAZARDOUS PRODUCT, inflammable stable under normal conditions
Causes eye and skin irritation. Harmful if ingested.
POTENTIAL HEALTH EFFECT :
INHALATION ; No information is available
SKIN contact ; May cause slight skin irritation. EYES contact ; Causes eyes irritation.
INGESTION ; No information is available.
NFPA:HR = health-1, flam.-0, react.-0
HMIS : health-1, flam. -0, react. -0
3. COMPOSITION/INFORMATION ON INGREDIENTS
SINGLE OR MIXTURE : Single
CHEMICAL IDENTIFICATION : Proprietry modified silione / (confidential) : ca. ~80%
Diethylene glycol monobutyl ether / (112-34-5) : ca. ~20%
Dibutyltin Dilaurate / (77-58-7) : ca. <0.1%
4. FIRST AID MEASURES
Description of first aid measures
Remove contaminated or saturated clothing
Inhalation
Following inhalation of aerosols or mist:
Move victims into fresh air.
If symptoms persist, consult a physician for treatment
Skin contact
Remove product from skin with dry cloth or towel, and wash exposed area with plenty of water and detergent
Consult a doctor in the event of permanent skin irritation
Eye contact
Keeping eyelid open, immediately rinse thoroughly for at least 15 minutes using plenty of water or, if
necessary, eye rinsing solution
In case of persistent discomfort: Consult an ophthalmologist
Ingestion
Have the mouth rinsed with water provided person is conscious. Never give anything by mouth to an
unconscious person. Consult a physician immediately
SAFETY DATA SHEET
iGreenLover™ Ecocoat Quartz
Material no.
Specification 154283 Revision date 22.04.2014
Version 1.12 Print date 23.04.2014
Page Page 2 of 4
Most important symptoms and effects, both acute and delayed
Symptoms
None known
Hazards
None known
Indication of any immediate medical attention and special treatment needed
If required, therapy of irritative effect.
After absorbing large amounts of substance:
Administration of activated charcoal.
Acceleration of gastrointestinal passage
5. FIRE-FIGHTING MEASURES
Flash Point :
>100°C
Unusual Fire Hazards:
None
6. ACCIDENTAL RELEASE MEASURES
Environmental precautions
Do not allow entrance in sewer water, soil stretches of water, groundwater, and drainage systems.
Method and material for containment and cleaning up
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Fill into marked, sealable containers.
To be disposed of in compliance with existing regulations.
Suitable binder: universal absorbent, diatomaceous earth
7. HANDLING AND STORAGE
Handling
Precautions for safe handling
Provide good ventilation or extraction.
Avoid contact with skin and eyes.
Storage
Conditions for safe storage, including any incompatibilities
Keep containers tightly closed in a cool, well-ventilated place. Protect from moisture.
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Component Exposure Limits
There are no components with workplace exposure limits
Ventilation
Local exhaust : None should be needed
Mechanical (general) : Adequate ventilation system
Special : Unknown
SAFETY DATA SHEET
iGreenLover™ Ecocoat Quartz
Material no.
Specification 154283 Revision date 22.04.2014
Version 1.12 Print date 23.04.2014
Page Page 3 of 4
Other : Unknown
Protective gloves : Plastic film or rubber gloves
Eye Protection : Safety glasses
Other Protective Clothing or Equipment : Safety shower and eyewash equipment
Work/Hygienic Practices
Avoid prolonged breathing vapor
Avoid contact with eyes and skin
Wash hands and gargle after handling
9. PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point : 180-220°C
Vapor Pressure : not applicable
Vapor Density (air=1) : not applicable
Specific Gravity : 1 (at 20°C)
Melting Point : Not applicable
Flash Point : >70 °C
pH : 7.0 +/- 0.5
Evaporation Rate : Not applicable
Solubility in Water : Not soluble (hydrolyzed with water)
Appearance (color) : transparent
Appearance (form) : Fluid
Odour : a little odour
10. STABILITY AND REACTIVITY
Stability : Stable
Condition to avoid : sunlight, heat
Incompatibility (material to avoid) : data none
Hazardous decomposition : data none
Hazardous Polymerization : Will not occur
11. TOXICOLOGICAL INFORMATION
Special hazard information on components
No known applicable information
12. ECOLOGICAL INFORMATION
Biodegradation : No information is available
Bioaccumulation : No information is available
Aquatic Toxicity : No information is available
Other Information : None
13. DISPOSAL CONSIDERATION
SAFETY DATA SHEET
iGreenLover™ Ecocoat Quartz
Material no.
Specification 154283 Revision date 22.04.2014
Version 1.12 Print date 23.04.2014
Page Page 4 of 4
Product
Not Hazardous, but local law may impose additional regulatory requirements regarding disposal.
14. TRANSPORT INFORMATION
<IATA INFORMATION>
ID No. : Non-correspondence
CLASS or DIVISION : Non-correspondence
PACKAGING GROUP : Non-correspondence
PROPER SHIPPING NAME : Non-correspondence
<DOT INFORMATION>
ID No. : Non-correspondence
HAZARD CLASS : Non-correspondence
PACKING GROUP : Non-correspondence
PROPER SHIPPING NAME : Non-correspondence
15. REGULATORY INFORMATION
National legislation
16. OTHER INFORMATION
No specific Notes
Further information
Changes since the last version are highlighted in the margin. This version replaces all previous versions.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at
the date of its publication. The information given is designed only as guidance for safe handling, use, processing,
storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The
information relates only to the specific material designated and may not be valid for such material use in combination
with any other materials or any process, unless specified in the test.

Author: Melbourne Mobile Detailing

Owner and operator of Melbourne Mobile Detailing (MMD) in Melbourne for 9 years and since then MMD has grown large enough with a huge customer base to cover many other detailers in Melbourne and surrounding suburbs dealing with paint protection, odour removal, sticker removal, car detailing, truck cleaning, boat/marine cleaning and aviation detailing in and around Melbourne

Leave a Reply

Your email address will not be published. Required fields are marked *

 All original content on these pages is fingerprinted and certified by Digiprove